Neoprene and Rubber Foam Tapes - Pres-On

Foam Tape & Gaskets, Neoprene and Rubber Foam Tapes
Neoprene Foam Tape – Firm – NE4300

100% Neoprene Foam Tape. Closed cell firm, black, with a smooth surface. Best quality neoprene foam with an industry leading…
NE4300
Foam Tape & Gaskets, Neoprene and Rubber Foam Tapes
Neoprene Foam Tape – Extra Firm – NE4400

Neoprene Foam Tape. Closed cell extra firm, black, with a smooth surface. Best quality extra firm neoprene foam with an…
NE4400
Foam Tape & Gaskets, Neoprene and Rubber Foam Tapes
Sponge Rubber Tape – Medium – P8000

Sponge Rubber Foam Tape. Open cell medium, black, with a crisscross surface. Very durable, non-slip, cushioning, textured, rubber foam with…
P8000
Foam Tape & Gaskets, High Temperature Foam Tapes, Neoprene and Rubber Foam Tapes
Silicone Foam Tape – Medium- High Temperature PSA – S800

Silicone Foam Tape. Open/Closed cell medium, black, gray, or red, with a smooth skin surface. Special order high temperature silicone…
S800
Foam Tape & Gaskets, High Temperature Foam Tapes, Neoprene and Rubber Foam Tapes
Viton Foam Tape – Medium

Viton®, Fluoroelastomer Foam Tape. Closed cell medium, black, with a smooth surface. Excellent chemical and temperature resilient foam with an…
Viton
Foam Tape & Gaskets, Neoprene and Rubber Foam Tapes
Neoprene Vinyl Foam Tape – Soft – P8400

Neoprene Vinyl Foam Tape. Closed cell soft, black, with a smooth surface. Budget foam with an industry leading adhesive bond.…
P8400
Foam Tape & Gaskets, Neoprene and Rubber Foam Tapes
Crushed EPDM Tape – Ultra Soft – P9400

Crushed EPDM Foam Tape. Closed cell ultra soft, black, with a smooth surface. Gap filling foam with an industry leading…
P9400
Cork Tapes, Engineered Materials, Neoprene and Rubber Foam Tapes
Cork Insulation Tape – Cork Filled Rubber Mastic Tape

Cork Insulation Tape is a cork filled rubber base mastic primarily used as a barrier to prevent water condensation on…
CI3200

Adhesive Adhesive Rubber adhesive is a permanent pressure sensitive adhesive that has a very high initial tack for slick surfaces and applications that need a quick bond. Acrylic adhesive is a permanent pressure sensitive adhesive that offer a long lasting bond, best suited for outdoor, higher temperature, and water-tight applications. +

Mastic 1

Acrylic 12

Rubber 4

Silicone 1

Type of Tape Type of Tape Plain - No adhesive. Single Sided Tape - adhesive on one side. Double Sided Tape - adhesive on both sides. +

Mastic 1

Single Sided 18

Double Sided 3

Plain, no adhesive 18

Cell Structure Cell Structure Closed Cell: Common for air and water tight gasket seal applications.Open Cell: Allows air water to filter through material. Common for light weight foam applications that need cushioning but not sealing attributes. +

Closed Cell 15

Open Cell 1

Open Cell (closed when compressed) 2

Soft of Firm Soft of Firm Foams materials range from Ultra Soft to Firm. Softer foams require less pressure to compress and may be more conformable. Firmer foams may offer be better durability. This is a general description, please use the additional engineering filters below if looking for specific compression deflection or shore ratings. +

Extra Soft 1

Soft 7

Soft / Medium 1

Medium 6

Firm 2

Extra Firm 1

Roll / Spool / Shape / Sheet Roll / Spool / Shape / Sheet Pres-On produces our products as rolls, sheets, long continuous length spools, or pre-cut (die-cut) shapes. Pre-Cut shapes can either be individual separated parts or kiss-cut on a roll. +

Rolls 20

Spools 19

Sheets 19

Pre-Cut Shapes 19

Color Color Most foam tape materials are available in black or a shade of gray. Some materials have color options such as white, grays, and red. Some felts and specialty materials can be ordered in special decorative colors. +

Black 19

Gray 2

Red 2

Price Range Price Range Filter by material cost. Some materials such as silicone are significantly more expensive due to material specifications. For general foam applications this filter allows you to browse our budget-friendly materials. +

Top Tier 3

Above Average 4

Above Mid-Range 3

Mid-Range 8

Durability Durability Durability is a rating based on general combinations of material tensile strength, rebound, and daily wear and tear. Performance will vary based on application. +

Excellent 4

Great 12

Good 3

Comp. Deflection - Force to Compress 25% Comp. Deflection - Force to Compress 25% This compression deflection slider is used to help find a range of for to compress the material 25%. Please see technical data for exact rating. +

1 psi 1

3.5 psi 6

5 psi 2

7 psi 4

7.5 psi 1

10 psi 2

11 psi 1

15 psi 1

Durometer Shore OO Durometer Shore OO Shore Durometer is a device for measuring hardness of materials. Typically foams are measured on the OO scale. The higher the number the firmer the material. Due to the nature of foam this should considered an approximate. Pres-On recommends using "Compression Deflection" over Durometer when determining the softness of foam. +

High Temperature Rating High Temperature Rating High Temperature (Service) is the high temp rating for continuous use. Many foams may be able to handle higher temperatures at intermediate, or short durations. If your application requires the foam to meet a high temperature please use this filter to sort our products by temperature rating. +

160 F 1

180 F 90 days no deterioration or slump from horizontal panel 1

200 F 3

220 F 4

250 F 7

392 F 2

400 F 1

Low Temperature Rating Low Temperature Rating Some materials are more brittle than others in cold environments. Use this filter if your application requires the material to meet extreme low temperature ratings. +

-30 F 30 days no deterioration or adhesion loss 1

-70 F 7

-67 F 2

-40 F 7

-20 F 1

-10 F 1

Surface Texture Surface Texture Smooth finish: flat surface without texture or a skin. Skin surface: a casted skin over the cell structure of the foam. Other textured surfaces such as criss-cross, embossed, ribbed are a unique feature to specific materials. +

Gummy 1

Smooth 13

Skin 3

Open Cell 1

Crisscross 1

Compression Set Compression Set Compression set is the % of material that does not rebound after the material has been under a prolonged compressed load. The lower the percentage the better the rebound. Sometimes referred to as C-Set. +

Enlongation Enlongation Elongation is the measurement of how long the material can be stretched before it breaks. +

Outdoor Rating Outdoor Rating This filters products that are suitable for outdoor environments. Note, a rating of excellent for outdoor does not mean the foam is recommended direct sunlight exposure, please use our UV exposure filter for applications in direct sunlight. +

Excellent 18

UV Exposure UV Exposure UV exposure is how well the material performs with prolonged exposure to sunlight. Use this filter if your application requires the foam to be in direct exposure to sunlight. +

Excellent 8

Good 1

Fair (limited exposure) 6

Not Recommended 2

Flame and Smoke Rating +

Chemical Resistance +

Excellent 4

Product Oil Resistance Product Oil Resistance These foams are recommended for applications that require a foam with oil resistance. +

Excellent 1

Low Swell 1

Food Contact Food Contact Some foams have been approved by the FDA for food contact. +

CFIA 1

FDA 2

USDA 1

Type of Liner Type of Liner Compression Liner: Liner that uses the force of the cap to seal. Pressure Seal: Liner with a pressure sensitive adhesive that adheres to the neck of your bottle. Heat Induction Foil Seal: Non-contact heating process that hermetically seals a foil based liner to your bottle. 2-Piece Heat Induction Foil Seal: Single liner material that separates into two pieces during the heat induction process, a hermetically sealed foil liner to your bottle, and a reseal foam or pulp compression liner to retain in the cap. Vented Heat Induction Foil Seal: Liners designed to allow venting of internal pressure. +

Cap Size Cap Size Most cap sizes are noted with the "neck size-thread finish", example 38-400 fits a 38mm neck bottle with a one turn thread. The liners size is considered a nominal size, the actual size of the liner usually measures smaller than the nominal size, (example 38mm's actually size is 36.8mm). Size standards were created by Glass Packaging Institute (GPI) and Society of Plastics Industry (SPI). Our liners are made to fit the common "E" measurement (outside diameter of the bottle neck), and inside the cap's "T" measurement (outside diameter of the thread). We also have 100's of sizes for any custom or unique cap design. If your size is not listed please select "Custom". +

Bottle Material Bottle Material Knowing your bottle material is very important when selecting a heat induction liner. The sealing element of a liner is designed to specifically seal to different materials. Universal liners seal to most all bottle types, but for the best seal it's recommended to select a material designed for your bottle. Note: PE liners will not seal to PET bottles, and PET liners will not seal to PE or Glass. +

Product Product in Bottle Product Product in Bottle Liquids are recommended to be sealed with heat induction foil seals. Pressure seals and many vented liners are recommended for dry goods only. Chemically aggressive products may need a custom liner. +

Liner Thickness Liner Thickness For standard one-piece heat induction foil seals, .007" to .01". Most common pressure seals and PE foam liners use .020" thickness. Some specialty cap and bottles or two-piece heat induction liners require special thickness. +

Print Print Heat induction liners are commonly plain (no print). Pressure seals are commonly printed with "Sealed for your protection" (SFYP) in Red, or Black. Custom print is available for large minimum production runs. +

Cap Liner Insertion Service Cap Liner Insertion Service Pres-On offers automatic cap lining insertion services. Our industry leading insertion machine can line most common caps from 20mm to 120mm. Special sizes available with new tooling. +

Liner Removal Service Liner Removal Service Pres-On has a machine that can remove liners from most common caps. If you have a cap with the wrong liner, we can remove that liner and automatically insert the correct liner. +

Product Services +

Product ASTM D 1056-67 +

Product ASTM D 1056-67 (outdated) +

2D3 1

SCE 41 5

SCE 41 / SCE 42 1

SCE 42 4

SCE 43 1

SCE 44 1

Neoprene Foam Tape – Firm – NE4300

Neoprene Foam Tape – Extra Firm – NE4400

Sponge Rubber Tape – Medium – P8000

Silicone Foam Tape – Medium- High Temperature PSA – S800

Viton Foam Tape – Medium

Neoprene Vinyl Foam Tape – Soft – P8400

Crushed EPDM Tape – Ultra Soft – P9400

Cork Insulation Tape – Cork Filled Rubber Mastic Tape

Thickness Thickness Thickness is height of the foam, measured from the adhesive side up. +

Material Material Material of the gasket. Different materials work better for different applications. Examples, EPDM is excellent for UV (sunlight) exposure, Silicone performs great for high temperature applications, Neoprene has great durability and rebound for enclosure door seals....etc +